- define samples:
+ WIMP analysis samples (signal & background)?
+ Higgsinos? Jackies or Hales?
- aa→2f for SGV processing?
- how about 6f? Not generated for DBD at 250 GeV, but processes like WWZ and vvWW etc should in principle be open?
- general purpose Bhabhas?
- cross-section validation => ongoing with Junping
- question from Daniel: status of tau polarisation in Whizard2 ?
- Number of events for each processes. Especially large Xsect. processes, such as 2f, 1f, 3f.
- Radiative return to Z events. Generate separately or generate all process together.
- Naming convention of whizard2 samples and directory structure.
- define samples:
- verify batch mode
- set up 6f ?
- generate events
- ea / ae / aa:
- create lumi spectra
- generate events
- aa overlay : Are they produced ? not on Dirac yet.
- seeable pairs => Mikael says is done (99% CL), not on Dirac yet.
- selection / adjustment of DD4HEP detector model
- vertex detector?
- create ddsim steering / config files for 250 GeV => ask Remi
- z vertex distributions for ee / ea / ae / aa => MIkael checks whether he has the numbers, then need to be put in ILDConfig
- verify that photon cluster position effect is not due to cell geometry problem => expected? Then calibration issue?
- simulate full pairs => ask Daniel => tune BeamCal reco!
- need to create BeamCal bg-map for large (and small) 250 GeV models
- w/ and w/o anti-DID
- for standard reco use same as for 500 GeV (w/ anti-DID ?)
- simulate seeable pairs
- simulate aa overlay
- simulate single particles for calibration => verify that LumiCal / LHCal are covered!
- solution unknown:
- muon reconstruction failure at costheta = 0.6 => needs 4 FTE weeks
- photon cluster position / angle bias => theta "just" a calibration/correction issue, phi unclear?
- photon energy calibration consistent with Pandora calibration
=> needs deep thinking on Pandora calibration strategy, Daniel will take a look once tautau benchmark is done
- z0/d0 errors in fwd region => on a good way, fix requires time?
- solution / procedure known:
- tune BeamCal reconstruction
- calibrate LumiCal & LHCal
- update parameters for beam spot constraint (LCFI)
- DISK SPACE ! (Cannot use tape back-end anymore) => estimate need: ~200 TB!
=> mc-opt3 currently is 600-700 TB!
But: reduce to one detector model => 350 TB
keep only 10% of REC files (but all SIM files) => 25% less ?
simulate only SiW Ecal + AHCal?
- Save sim files of all events, but save REC files only for 10% of events
→ How to operate/select/control 10% files? # of split generator file base? Set additional meta key to save REC file.
→ Need to investigate DIRAC codes how to save only DST files w/o producing REC files in production jobs.
- Required statistics : 2ab-1 for each channel?
→ Estimate required disk space and CPU times for required statistics.
→ How about the large cross-section channel? (2f, 4f)
→ How about the 6f samples?
- update production scripts
- make sure whizard2 lcio file splitting works
- Update for new directory structure and file name conventions.
→ Revisit file name convention : "wizard2" as "w2"?
- simulate aa_lowpt and seeable pair background files. Update scripts to 250 GeV background files.
- Need small whizard2 samples of various process type for development of production scripts.
- Save tar-gzipped log files on tape directory.
- File save location : DESY-SRM as primary and KEK-SRM as secondary, need to purchase TAPEs at KEK.
BG samples situation
Gen Set A
Sim Set A
Not yet (Tim)
Not yet v02
Solved issues (for new productions)