Page tree

Description: page reserved for preparation, task list, and records of the test beam in April 2019 at DESY T24/1.


0. Preparation

Instruction

How-to run aida TLU + mimosa + KPiX



Note:

  • TLU Clock is always sent out via HDMI_3, where lycoris should be plugged in;
  • AZALEA is supposed to be on HDMI_4;
  • Shutter (kpix acq. start signal) delay w.r.t. E_min is set to be 30ms (5 GeV);
  • START of TLU active delay w.r.t. Shutter is set to be 6 ms (so bunchclkdelay 3000 * acq.clksel 320ns + triginhibitdelay 1000 * bunchclk 8*320ns + extra delay to avoid time edge problem 2.5ms i.e 1000 * 2.5us)
  • Period of TLU active is set to be 4.5ms (active for 1800 bunchclkcount, i.e. trigger sent out from 2000 to 3800);

How-to control Wiener PS

power/power-cycle the DAQ board

cd workspace/Wiener-PS
./power_daq.sh

power the cassette in T24

./power_cassette.sh on
./power_sensor.sh on

power the 2nd cassette for PCMAG

./power_cassette2.sh on
./power_sensor2.sh on

check current on terminal

./check_current.sh


NOTE:

  • This is only valid if you are using the LV at Channel 0,1 and 6,7;
  • HV at channel 100, 101, 102, and 105, 106, 107.
  • DAQ board at channel 303.

How-to run KPiX

On aida2020-kpix1 PC

cd workspace/kpix/software
setrogue
source setup_mac.sh

# Do a normal RUN in GUI-less mode python scripts/Run.py --config YOUR_YAML_CONFIG_FILE -o YOUR_OUTPUT_FILE_DIR -r NUMBER_OF_RUNCOUNTS_NEEDED

# Do a Calibration RUN in a GUI-less mode
python scripts/Calibration.py --config YOUR_YAML_CONFIG_FILE -o YOUR_OUTPUT_FILE_DIR

INFO:

  • If you wanted to run TLU CLK: ensure you have TLU INIT+CONF from EUDAQ2;


How-to Analyse data

On aida2020-kpix1 PC

There are three types of data and 4 types of analysis.gear/gear-mimosa-255-b.xml

  1. Self triggering data:
  2. External triggering data
  3. Calibration data

cd KPiX-Analysis

1st

./bin/analysis_newdaq YOUR_DATA_FILE (OPTIONAL: YOUR_CALIBRATION_ROOT_FILE)

Output = YOUR_ANALYSIS_FILE

2nd

./bin/pedestal_tree YOUR_DATA_FILE YOUR_CALIBRATION_ROOT_FILE

Output = YOUR_PEDESTAL_OUTPUT_ROOT_FILE

./bin/analysisExternal_tree YOUR_DATA_FILE YOUR_CALIBRATION_ROOT_FILE YOUR_PEDESTAL_OUTPUT_ROOT_FILE

Output = YOUR_EXTERNAL_TRIGGER_ANALYSIS_FILE

3rd

./bin/ymlCalibrationFitter  YOUR_DATA_FILE

Output = YOUR_CALIBRATION_ROOT_FILE

4th

./bin/cluster_analysis YOUR_DATA_FILE YOUR_CALIBRATION_ROOT_FILE YOUR_PEDESTAL_OUTPUT_ROOT_FILE

output = YOUR_EXTERNAL_CLUSTER_ANALYSIS_FILE


While most analysis is generalized to provide debugging info. pedestal_tree and cluster_analysis are specialized and provide only the bare essentials to ensure the analysis is relatively quick.

Mimosa configurations inside PCMAG

AIDA TLU

New KPiX DAQ

Power Supply

1. Lists of Task & Shift

See all the data TODO from google spreadsheet: https://docs.google.com/spreadsheets/d/1tM8FsU13CEi1ZQkcVgS2LduwV5jBrAu3nJzfJ71rHgI/edit?usp=sharing

Shift Table

Please asign Uwe Kraemer Mengqing Wu

DateMon 08.07Tue 09.07Wed 10.07Thu 11.07Fri 12.07Sat 13.07Sun 14.07
Morning Shift
9:00 – 16:00





Mengqing Wu

ps: have to leave at 12:30/13:00

Afternoon Shift
15:30 – 22:00




Mengqing Wu

ps: can only come after 15:00


DateMon 15.07Tue 16.07Wed 17.07Thu 18.07Fri 19.07Sat 20.07Sun 21.07
Morning Shift
9:00 – 16:00
Uwe KraemerUwe Kraemer
Afternoon Shift
15:30 – 22:00

Uwe Kraemer  we will probably have to install stuff so not sure how much shift there will really be.


Uwe KraemerUwe Kraemer


2. Day Log

July 8, Monday

To install and test all the components

July 25, Thursday

Log Note:  note_mq_20190725.txt

Mimosa aligned back again: ( Horizontal +128.68mm,  Vertical -5.10mm )

July 26, Friday

Log Note: 

July 27, Saturday

Log Note: notes_mengqing-20190727.txt

July 28, Sunday

Log Note: note_mq_20190728.txt

3. Photo gallery


4. Setup Explanation


5. Setup: Dimentrons etc.

Sensors to Layer Number

Upstream: (used in T24)

Layer 0 = S59
Layer 1 = S43
Layer 2 = S1st

Downstream:

Layer 3 = S48
Layer 4 = S47
Layer 5 = S46

T24 Geometry


T24/1 Geometry

  • No labels