Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  •  Create single jDDD Panel for operators which shows everything needed  Nils Maris Lockmann
  •  check, and in best case solve, the limitation to 1024 resp. 2048 bunches Olaf Hensler
  •  Check if grating transition allowed works properly now Olaf Hensler Nils Maris Lockmann 
    •  add message on panel (reconstruction still goes on )
  •  low charge fudge factor
  •  Make Igor's linear-taper-from-charge-profile Matlab script available in BKR Lars Froehlich 
  •  Zero reconstruction if no bunches or error (e.g. too little signal, grating threshold) Lars Froehlich
  •  Reconstruction for a list of fixed bunches  Lars Froehlich
  •  Add skew parameter as history value Lars Froehlich
  •  send profiles to DAQ and have a jDDD interface to view old DAQ data Olaf Hensler Lars Froehlich
  •  investigate low signal limits and indicator to change grating sets Nils Maris Lockmann 
  •  establish information exchange with long. phase space reconstruction efforts Sergey Tomin 
  •  provide new DOOCs adress of reconstruction for Sergej Nils Maris Lockmann 
  •  Create new buffers for averaging of subtrains Olaf Hensler 
  •  4.5 MHz warning based on "XFEL.DIAG/TIMING.CENTRAL/MASTER/BUNCH_FIRST_INDEX.1" Lars Froehlich 
  •  investigate why reconstruction was non-zero without beam. Error "Not enough input data points to extrapolate low frequencies" Lars Froehlich 
  •  CRISP reconstruction server: Implement HOLD properties Lars Froehlich 
  •  check capability of DAQ with finer time grid with V. Rybnikov Olaf Hensler