...
- Create single jDDD Panel for operators which shows everything needed Nils Maris Lockmann
- check, and in best case solve, the limitation to 1024 resp. 2048 bunches Olaf Hensler
- Check if grating transition allowed works properly now Olaf Hensler Nils Maris Lockmann
- add message on panel (reconstruction still goes on )
- low charge fudge factor
- Make Igor's linear-taper-from-charge-profile Matlab script available in BKR Lars Froehlich
- Zero reconstruction if no bunches or error (e.g. too little signal, grating threshold) Lars Froehlich
- Reconstruction for a list of fixed bunches Lars Froehlich
- Add skew parameter as history value Lars Froehlich
- send profiles to DAQ and have a jDDD interface to view old DAQ data Olaf Hensler Lars Froehlich
- investigate low signal limits and indicator to change grating sets Nils Maris Lockmann
- establish information exchange with long. phase space reconstruction efforts Sergey Tomin
- provide new DOOCs adress of reconstruction for Sergej Nils Maris Lockmann
- Create new buffers for averaging of subtrains Olaf Hensler
- 4.5 MHz warning based on "XFEL.DIAG/TIMING.CENTRAL/MASTER/BUNCH_FIRST_INDEX.1" Lars Froehlich
- investigate why reconstruction was non-zero without beam. Error "Not enough input data points to extrapolate low frequencies" Lars Froehlich
- CRISP reconstruction server: Implement HOLD properties Lars Froehlich
- check capability of DAQ with finer time grid with V. Rybnikov Olaf Hensler
...