- This line was added.
- This line was removed.
- Formatting was changed.
For short and to-the-point Git tutorials see e.g. here:
Git identifies the authors of commits by their email, so when you first use git on a new system, you have to tell it yours:
$ git config --global user.name "John Doe" $ git config --global user.email "firstname.lastname@example.org"
--global option puts this into your global
~/.gitconfig file, which applies to all your local git repos. Using
--local (the default) allows a per-repository setting.
The email you use should be the one associated with your Stash user account. That way, your commits are associated with your Stash user.
To clone the main
scetlib repo, do
$ git clone ssh://email@example.com:7999/scetlib/scetlib.git
- This creates a new working repo in the subdirectory
scetlib/of the current directory.
- The repository data itself is in
scetlib/.git/ directory. (The repo's main configuration lives in
scetlib/.git/config, which can be useful occasionally.
scetlib/directory itself serves as the working area. (It starts out containing the content of the default branch, typically either
The possible access methods and different repositories are described below.
We use a standard Git workflow, where all feature development happens in branches. Each module has its own branch with possible sub-branches for feature development. The integration happens through the develop branch.
Here is a summary of the conventions for branches and their relations
|Branch||Purpose||Originates from||Merges into|
|Public access for stable releases, contains abridged (squashed) version of master|
|Critical fixes to stable releases|
|Integration of all features that will go into next release|
|Preparation for stable release|
|Development of core library|
|Main development for module 'xxx'|
|Development of 'feature' in module 'xxx'|
Below, we go through the most important usage of git commands, and mention the most useful options.
All commands have additional options for special purposes or finetuning their behavior. There are also many additional commands. To see a detailed documentation for a command with a list of all options and usage examples, do
$ git help <command>
Git commands always act on the entire repository you are in, it does not matter in which directory you are inside your working area (this is a big difference to svn)
List of all branches (with the current branch highlighted):
$ git branch [-vv | -a | -avv]
- The different options give different level of detail. The
-avvoption is the most useful. With
-ait shows both local and remote branches. With
-vv, for each local branch, it shows which remote branch it trackes and by how many commits it is ahead/behind.
Show the commit history on the command line:
$ git log [--oneline] [--graph]
- By default, the complete commit information (author, date, messag) is shown. With
--onelineonly the first line of each commit message is shown.
--grapha text-based graphical representation of the commit tree is included.
- There are many options for formatting etc. However, there are many external programs for graphically visualizing the commit history tree, which are more convenient to use than
git logfrom the command line. A standard program coming with git is
gitk, which also shows the detailed changes.
Working with branches
in git are simply pointers to commits. Commits do not belong to (are "owned by") specific branches.
Switch to a branch to start working on it, in this example the
$ git checkout develop
- This updates the working tree to reflect the content of
develop(more precisely, the commit
- This also updates the HEAD to point at
develop, which makes it the "current branch" which many operations (commit, merge, etc.) are relative to.
- As a special case: If the given branch exists as a remote branch (e.g.
origin/develop) but has not been checked out yet, this will automatically create a local branch
developwhich henceforth tracks
Create a new branch, say
feature-cool, and start working on it:
$ git checkout -b feature-cool [<start-point>]
- This first creates the new branch pointing at the given
<start-point>or if not given the current HEAD. It then switches to the new branch.
This is exactly equivalent to
Code Block language bash
$ git branch feature-cool [<start-point>] $ git checkout feature-cool
Rename or delete a branch:
$ git branch -m feature-cool feature-supercool $ git branch [-d|-D] feature-supercool
-doption only deletes the branch if some other branch points to the same commit, while
-Ddeletes it no matter what.
Show the current status of the working tree and the commit staging area (also called the 'index'):
$ git status [--ignored]
--ignoredoption also shows all files that are being ignored by git.
- In general
git statusis your best git friend, since it also tells what and how to do next.
Register changes to be part of the next commit
$ git add <files> $ git add <path>
- This adds the given modified or new
<files>or all modified/new files in the given
<path>to the commit staging area (also called the index). All modifications (not just new files) have to be staged before committing. Further modifications to already staged files have to be added again.
- The staging area is useful since it selectively allows to choose which changes should be part of the next commit.
$ git reset <files> $ git reset <path>
- Removes the given
<path>from the staging area, so this is the oppsoite of
- Note that
git resetis rather powerful, so one has to be a bit careful. (When given a branch or commit it will operate on the entire commit.)
Commit staged changes:
$ git commit [--amend]
- This turns the content of the staging area into a new commit object and updates the current branch to point to it.
- Normally, this opens an editor to compose a commit message. Please write useful commit messages.
--amend, the staged changes are combined with the previous commit into a new commit which replaces the previous commit. This is very useful to fixup the last commit when some changes were forgotten or to fix a bug. However, see the warning on changing history below.
A convenient graphical tool for staging and unstaging, reviewing changes, and committing is
$ git gui &
Good commit messages are crucial for navigating the commit history, finding bugs, etc.
Write one line/sentence (in active present tense) with a short description of what the commit does.
The main purpose is to document the commit and the changes, not so much to discuss your reasons for doing so.
An often useful form is to give a bullet list with details:
Git has two different ways to combine the changes in different branches, merging and rebasing.
Merge changes from
<branch> since its history diverged from the current branch into the current branch (see
git help merge for details and examples)
$ git merge <branch>
- This creates a so-called merge commit which has both branches as childdren and thus combines the histories of both branches.
- In case of a conflict, the merge stops before committing. The conflict can then be manually resolved and the final result staged and committed as usual. Alternatively, the merge attempt can be abandoned with
git merge --abort, which returns the current branch to its pre-merge state.
<branch>is directly ahead of the current branch, so there is no fork in the history, the merge resolves as a so-called fast-forward merge. In this case, the current branch is simply updated ("fast-forwarded") to point at
<branch>without generating a separate merge commit.
- While possible, it is strongly discouraged to run this if you have uncommitted local changes (since in that case aborting the merge can fail to recover the pre-merge state).
Reapply changes of each commit of the current branch since its history diverged from
<branch> on top of
git help rebase for details and examples)
$ git rebase [-i] <branch or commit>
- This ports/transplants each commit after the common ancestor one-by-one onto
<branch>, appropriately merging each one with the existing changes in
- This creates new commit objects and discards the old ones (unless they belong to the history of a another branch), and therefore changes the history of the current branch.
- In case of merge conflicts, the rebase stops. After manual conflict resolution, it can be continued with
git rebase --continueor abandonded with
git rebase --abort.
- As with merge, if
<branch or commit>is directly ahead of the current branch, it will simply be fast-fowarded.
- If the piece of history being rebased itself contains a nonlinear merge history, that history will be flattened out and lost. It is then better to use merge if the history should be preserved. This means, that in general only commits after the last merge commit are easy to rebase.
-ioption triggers an interactive rebase. This allows the commits to be selected, combined, reordered, edited, etc. This allows to rewrite and reorder the history of the current branch by specifying a
<commit>to rebase against which is in the direct past of the current branch, such as
Rebasing keeps the commit tree linear, which tends to make future merges easier (e.g. more likely to resolve as fast-forward). However, see the warning on changing history below. If possible/allowed, use rebase
Merging preserves the exact commit and merge history, including the historical existence of branches and connection between different branches. Use merge
Throw away changes:
$ git reset --hard <branch or commit>
- This resets the current branch and working tree to the state of the given branch or commit, throwing away all commits and changes since the common ancestor.
- Basically this is useful for throwing away a failed experiment. But be careful, since this also discards any local changes to tracked files in the working area.
- The parent of the current commit is conveniently specified by
HEAD~, and similarly
HEAD~2is the current commit's grandparent. This also works for branches and commit ids, so
develop~3refers to the commit 3 steps back from the commit the
developbranch points at.
Interacting with remote repos
are also just pointers to locally known commits. Their difference to local branches is in their different behaviour.
In git, updating your repo with new changes from a remote repo (the equivalent of
svn update) is a two-step process: First you download new commits, then, if needed, you combine those with your current work using rebase or merge, just like combining changes between local branches. Separating the two steps provides much more control over nontrivial merges or conflicts, which makes handling them much easier.
Download upstream commits from the remote repo:
$ git fetch [-p]
- This downloads new commits and also updates the corresponding remote branches.
- To investigate the upstream changes, you can do
git checkout origin/<branch>.
The -p option removes any remote branches that do no longer exist on the remote repo.
Incorporate upstream commits with your local ones:
$ git [i-] rebase [origin/<currentbranch>]
- This uses rebase as described above to reapply any new local commits in the current branch on top of the remote branch.
- If the current branch is called
<currentbranch>and is setup to track the remote branch
<origin/<currentbranch>(which is the standard case), then the remote branch is automatically supplied and can be omitted.
- By default you should use rebase to combine the remote changes with your local (unpublished) commits.
Merge upstream changes with your local ones:
$ git merge [origin/<currentbranch>]
- This uses mege as described above to merge the remote branch with your local one. As with rebase, if the current branch tracks the remote branch, the remote branch is automatically supplied and can be omitted.
- By default, you should use rebase instead of merge here, since it avoids cluttering the history with typically meaningless merge commits (unless part of your local history being merged is for some reason already public
Single Step Pull:
$ git pull [--rebase]
- This precisely performs the above fetch and merge, or with the
--rebaseoption fetch and rebase. (So it behaves similar to
- This sounds convenient, but it is discouraged, because you cannot see the fetched changes and loose control over what gets merged.
Upload your changes to the remote repo:
$ git push [-u-all] [--all]$ git push -u origin <newbranch>
- This uploads new local commits for the current branch (or with
--allfor all local branches) to the remote repo together with updating the remote branches.
- The push is only accepted if no nontrivial merge is required on the remote end, i.e. all remote branches can be fast-forwarded. Otherwise, it means the remote history has diverged from yours, in which case you first have to fetch and incorporate the two histories and then push.
- When pushing The second form is used to push a newly created local branch, use where the
-uis to setup the local branch to henceforth track the newly created remote branch.
And finally, here is the promised
Commits that have been pushed become public history and once someone has pulled them they become shared history. Shared history should never be changed, which means:
The reason is that anyone having pulled the history, by pulling again their remote branches will now point to the changed history but their local branches will still point to the previous history. This can be very confusing and hard to recover from, especially if they already have nontrivial changes.
The repositories are hosted on DESY Stash.
(master, develop, core, module branches)
clone/pull: all developers
browse/comment: all developers
push: module developers only
|stores module data|
|public releases (stable branch)||clone/pull/browse: public|
|read/write: module developers only|
There are different methods for accessing the Stash repositories summarized here:
|Method||How to access||Operations|
|ssh||clone, pull, push|
|https||clone, pull, push|
|web interface||browse, comment, pull request|
There are three ways to authenticate with Stash:
- authenticated access requires a DESY Stash account and allows all three methods above
- unauthenticated access is possible for ssh access only
- anonymous access is possible via https and web for public repositories only
Here is a summary of allowed operations for the different levels of authentication:
|clone, pull, browse public|
|push to unrestricted branch||/||( via ssh)|
|push to write-restricted branch||/|
Here / means that access can be configured for specific users if needed.
Configuring ssh access
ssh is the recommended way for command-line access, since it uses ssh keys and no passwords are required.
To configure authenticated ssh access, go to your Stash profile and install your public ssh key. When accessing the git repos via ssh using a so-installed ssh key, the Stash server automatically authenticates and associate the access with your Stash account.
For unauthenticated ssh access, your public ssh key can be installed directly in the repo (you have to email it to Frank). The advantage is that this works without requiring a Stash account, but it has some limitations as shown in the table above.
Some networks block port 7999. In this case https is the only fall-back option.
|Table of Contents|
|Create from template|