BOLD entries are important and often used by Users ...
Contents:
The User DAQs can be configured to save a certain set of predefined parameters. The parameters are grouped in so-called subsystems which are described below.
The actual configuration has to be done using the RCGUI. To look what DOOCS properties are actually saved within one specific subsystem one can use the "show properties in subsystems" button.
Common subsystems (for FLASH1 and FLASH2)
DAQ internal servers (needed to run the DAQ)
| Name of the subsystem | function | description |
| FL1/2USER1/2/3_ALL_MAIN_DAQ | DAQ Server (HAS TO BE INCLUDED!) | Main DAQ server |
| FL1/2USER1/2/3_DAQ_FAST_COLLECTOR | DAQ Server (HAS TO BE INCLUDED!) | Main DAQ server |
| FL1/2USER1/2/3_EVB | DAQ Server (HAS TO BE INCLUDED!) | Main DAQ server / Event builder |
| FL1/2USER1/2/3_EVB_RAW | DAQ Server (HAS TO BE INCLUDED!) | Main DAQ server / Event builder |
| FL1/2USER1/2/3_DAQ_MONITOR | DAQ Server (SHOULD TO BE INCLUDED!) | DAQ MONITOR server to check and send data |
Subsystems for FLASH1
FL1 Photon Diagnostics
| Name of the subsystem | function | description |
| PHOTON_DIAG_FL1_GMD_PULSE_ENERGY | Photon Diag Information (always saved in photon diag stream) | Contains all relevant information from the GMD. Including the pulse resolved energy, the calibrated average pulse energy, the averaged XUV-beam position measured with the GMD, and the respective error bars ("sigma"). All additional expert parameters that are not needed for User data analysis (only for GMD troubbleshooting) are summarized in PHOTON_DIAG_FL1_GMD_EXPERT which is only available in the PBD. |
FL1USER1/2/3_PHFLUX_COPY (Old GMD server based on VME based data) (will be removed end of 2020) | DAQ Server | Server that COPIES the pulse energy per pulse of the FEL (GMD Values) that are calculated in the PBD DAQ. If GMD values are needed in the user DAQ THIS ONE should be used |
PHOTON_DIAG_GMD_BEAM_POSITION (Old GMD server based on VME based data) (will be removed end of 2020) | Photon Diag Information (always saved in photon diag stream) | Gas monitor detector Positioninformation of the XUV Beam. |
| PHOTON_DIAG_VLS_ONLINE_SPECTROMETER_CAMERA | Photon Diag Information (usually saved in photon diag stream) | Data of the online spectrometer. The spectrometer has to be moved in and set up ! check with your local contact |
| PHOTON_DIAG_TUNNEL_SPECTROMETER_CAMERA | Photon Diag Information (always saved in photon diag stream) | The Data of the XUV spectrometer located in the FLASH1 tunnel. (The spectra are anyway always when the mirror reflects XUV light to the detector in the GMD_DATA) |
| PHOTON_DIAG_APERTURES_TUNNEL | Photon Diag Information (always saved in photon diag stream) | Position of the apertures in the FLASH1 tunnel |
| PHOTON_DIAG_MCP_TUNNEL | Photon Diag Information (always saved in photon diag stream) | MCP tool in the photon diag. section in the tunnel - Needs experts to be operated! Usually not active |
FL1 Electron Diagnostics
| Name of the subsystem | function | description |
| FLASH.BAM.DAQ (ELECTRON_BEAM_ARRIVAL_MONITOR) | Electron Beam diagnostics (also in GMD stream) | Arrivaltime of the electrons for each bunch |
| ELECTRON_BUNCH_CHARGE | Electron Beam diagnostics | Bunch charge for each electron bunch along the accelerator |
| ELECTRON_BUNCH_COMPRESSION_MONITOR | Electron Beam diagnostics | Bunch compression monitors. They give a relative measure for the electron bunch duration |
| FLASH.BPM (ELECTRON_BEAM_POSITION_MONITOR) | Electron Beam diagnostics | Beam position of the electron bunch for different positions in the accelerator |
| FL1USER1/2/3_ENERGY_COPY | Electron Beam diagnostics | Server that calculates the electron energy and the resulting XUV wavelength for each bunch. IT NEEDS THE MAGNETS, ELECTRON_BUNCH_CHARGE and FLASH.BPM to be included in order to work !!! |
| TIMING_INFO_1 | General timing information | Train ID, set, bunch pattern, start time of FLASH1 ... |
FL1 Beamlines
| Name of the subsystem | function | description |
| PHOTONDIAG_FAST_SHUTTERS | Fast shutter status (also in GMD stream) | ADC readout of the status of the BL and the PG shutter (0 is closed / 1 is open) |
| EXPERIMENT_BL_POLARIZER | BL beamline data | motor positions of the permanently build in polarizer in the BL beamlines |
EXPERIMENT_PROPERTY_SERVER_PARAMETER (BL2 Split and delay unit) | BL beamline data | The settings of the BL2 Autocorrelator |
| PG_FILTER_WHEELS | PG Beamline data | Position information of the 3 PG filter wheels |
| PG_APERTURE_UNIT_WAU | PG Beamline data | Slit positions of the (water cooled) aperture unit in front of the mono |
| PG_MONO | PG Beamline data | settings of the PG monochromator |
| PG_MONO_FAST | PG Beamline data | ?????????????????????????????????????? |
| PG2_EXIT_SLIT | PG Beamline data | settings of the exit slit (including the set dispersion) |
| PG.ENCODER | PG Beamline data | Encoder readback values of ???????? encoder at PG |
| PG2_SPLIT_AND_DELAY | PG Beamline data | PG2 Split and delay unit motor positions and encoder readings |
| PG2_MCP | PG Beamline data | MCP tool at the PG2 |
| PG0_VME_ADC | PG Beamline data | ADCs of the PG0 VME |
| PG2_VME_ADC | PG Beamline data | ADCs of the PG2 VME |
Experiment related infrastructure (integrated at the beamline)
| Name of the subsystem | function | description |
| EXPERIMENT_GHZ_ADC_BL1 | Data from the Experiments | MTCA based 2/4 Gsample ADC available via patch panel at the beamline |
| EXPERIMENT_GHZ_ADC_BL2 | Data from the Experiments | MTCA based 2/4 Gsample ADC available via patch panel at the beamline |
| EXPERIMENT_GHZ_ADC_BL3 | Data from the Experiments | MTCA based 2/4 Gsample ADC available via patch panel at the beamline |
| EXPERIMENT_GHZ_ADC_PG | Data from the Experiments | MTCA based 2/4 Gsample ADC available via patch panel at the beamline |
| EXPERIMENT_MHZ_ADC_BL1 | Data from the Experiments | MTCA based 108 Msample ADC available via patch panel at the beamline |
| EXPERIMENT_MHZ_ADC_BL2 | Data from the Experiments | MTCA based 108 Msample ADC available via patch panel at the beamline |
| EXPERIMENT_MHZ_ADC_BL3 | Data from the Experiments | MTCA based 108 Msample ADC available via patch panel at the beamline |
| EXPERIMENT_MHZ_ADC_PG | Data from the Experiments | MTCA based 108 Msample ADC available via patch panel at the beamline |
| EXPERIMENT_ADC_PULSE_HEIGHT_BL1 | Data from the Experiments | This server integrates the area below the peaks detected by the 108 Msample ADC and delivers one value per FEL pulse in the train. |
| EXPERIMENT_ADC_PULSE_HEIGHT_BL2 | Data from the Experiments | This server integrates the area below the peaks detected by the 108 Msample ADC and delivers one value per FEL pulse in the train. |
| EXPERIMENT_ADC_PULSE_HEIGHT_BL3 | Data from the Experiments | This server integrates the area below the peaks detected by the 108 Msample ADC and delivers one value per FEL pulse in the train. |
| EXPERIMENT_ADC_PULSE_HEIGHT_PG | Data from the Experiments | This server integrates the area below the peaks detected by the 108 Msample ADC and delivers one value per FEL pulse in the train. |
| EXPERIMENT_ADC_DMA_PARAM | Data from the Experiments | Sample rates of the ADCs (for technical reasons this saves the rates of ALL fast ADCs at FLASH ...) |
| EXPERIMENT_ADC_TRIG_TIMING | Data from the Experiments | Saves the timing settings of the ADC boards. (for technical reasons this saves the timings of ALL fast ADCs at FLASH ...) |
| EXPERIMENT_PROPERTY_SERVER_PARAMETER | Data from the Experiments | Parameters 19,20,21 and 60 of the FS-FL property server. This numbers can be set by an external program. And the settings of the BL2 Autocorrelator |
Subsystems for User experiments
| Name of the subsystem | function | description |
| EXPERIMENT_GOTTHARD1 | Data from user experiments | data from the (mobile) PSI Gotthard fast line detector detector |
| EXPERIMENT_KALYPSO | Soon to come fast line detector for users ... | |
| EXPERIMENT_MOTT_DETECT_ADC | Data from user experiments | data from the MOTT detector |
| EXPERIMENT_HEXTOF | Data from user experiments | data from the HEXTOF detector |
| EXPERIMENT_HEXTOF_MOTORS | Data from user experiments | Motor positions of the aparatus |
| EXPERIMENT_THEMIS_DETECTOR_4Q | Data from user experiments | data from the THEMIS detector |
| EXPERIMENT_MULTIP | Data from user experiments | some cameras associated to the MULTIP experiment |
| EXPERIMENT_MULTIP_CAM2 | Data from user experiments | some more cameras associated to the MULTIP experiment |
| EXPERIMENT_MUSIX | Data from user experiments | some cameras associated to the MUSiX experiment |
| EXPERIMENT_MUSIX_MOTORS | Data from user experiments | some motors associated to the MUSiX experiment |
| EXPERIMENT_COOKIEBOX_ADC | DATA from 16 GHz ADCs | used for the Petra cookiebox (only available on User3 upto now) |
| EXPERIMENT_BL_POLARIZER | BL beamline data | motor positions of the permanently build in polarizer in the BL beamlines |
CAMP / BL1
| Name of the subsystem | function | description |
| CAMP_PARAMETERS | Data from experiments | Pressures of the CAMP chamber(s) |
| CAMP_DESC | Data from experiments | Motor positions of DESC delayline |
| CAMP_ISEG | Data from experiments | High voltage settings of CAMP detectors |
| CAMP_JET | Data from experiments | Settings of the gas / cluster jet at CAMP ? |
THz Beamline
| Name of the subsystem | function | description |
| THZ_BEAMLINE_DELAY | THz Beamline Data | Positions of the THz Delayline |
FL1 Cameras
| Name of the subsystem | function | description |
| HASFANDORCAM.CAMERAS | Camera images | for Andor cameras (on hasfandor.desy.de) |
| CAMERA_BL_HASFBLCAM1 | Camera images | CAMP beamline cameras on on HASFBLCAM1 |
| CAMERA_BL_HASFBLCAM2 | Camera images | cameras on on HASFBLCAM2 ( also mainly CAMP usage) |
| CAMERA_BL_HASVUVFW01 | Camera images | can save Beamline cameras ( e.g. BL0M0 cam ...) |
| CAMERA_PG_HASVUVPGFW4 | Camera images | Cameras at PG |
| CAMERA_PG_HASVUVPG1 | Camera images | PG ROIs & Images of Cameras (1,2A,2B,3,3.2,4.2) (Computer hasvuvpgfw1; PG1 Rack) |
| CAMERA_PG_HASVUVPG2 | Camera images | PG ROIs & Images of Cameras (ANDOR,4,6,7SES) |
| CAMERA_PG_HASVUVFW01 | Camera images | PG2 Experiment camera ports, flexible to use for user experiments (HASVUVFW01 in PG2 Rack) |
| CAMERA_ICCD8 | Camera images | PCO camera (meanwhile permanently installed at the FL2 Spectrometer) |
FL1 PPlaser
| Name of the subsystem | function | description |
| PP_LASER_ADC | Pump-Probe Laser Data | ADCs used to measure photodiode signals looking at the laser beam |
| PP_LASER_DIAG_SLOW | Pump-Probe Laser Data | The encoder of the delayline ( actually saved as fast 10 Hz data!), delay settings, streak camera etc |
| PP_LASER_SYNCHRONIZATION | Pump-Probe Laser Data | Info about the quality of the synchronization of the laser |
| CAMERA_PPLAS_HASFPPLASCAM | Camera images | Cameras in the laser hutch |
| FLASH.FEL.FLAPPRACK | Pump-Probe Laser Data | values of the drift correlator ? |
| PP_LASER_BL1_CORR | Pump-Probe Laser Data | Laser pulse duration setup at BL1 / CAMP |
Subsystems for FLASH2
FL2 Photon Diagnostics
| Name of the subsystem | function | description |
| PHOTON_DIAG_FL2_GMD_PULSE_ENERGY | Photon Diag Information (always saved in photon diag stream) | Contains all relevant information from the GMD. Including the pulse resolved energy, the calibrated average pulse energy, the averaged XUV-beam position measured with the GMD, and the respective error bars ("sigma"). All additional expert parameters that are not needed for User data analysis (only for GMD troubbleshooting) are summarized in PHOTON_DIAG_FL2_GMD_EXPERT which is only available in the PBD2. |
| OPIS_DATA | Photon Diag Information (always saved in photon diag stream) | averaged ( few sec) wavelength measured by OPIS ( OPIS is not running permanently ... ask your local contact). FAST OPIS data is NOT forseed to be saved in the User DAQ! |
| CAMERA_ICCD8 | Photon Diag Information | Camera of the FL2 Spectrometer located at FL22 |
| PHOTON_DIAG_FL2_MCP | Photon Diag Information (always saved in photon diag stream) | MCP tool in the photon diag. section in the tunnel - Needs experts to be operated! Usually not active |
| FL2USER1_COMPACT_SPECTROMETER | Photon Diag Information (ML server) | The compact spectrometer is a movable XUV spectrometer that can be put behind a (transparent) experiment. The ML server calculated the spectrum ( incl WL axis) |
| FL2USER1_COMPACT_SPECTROMETER_CAM | Photon Diag Information | This subsystem saved the camera images for the compact spectrometer. |
FL2 Electron Diagnostics
| Name of the subsystem | function | description |
| FLASH.BAM.DAQ (ELECTRON_BEAM_ARRIVAL_MONITOR) | Electron Beam diagnostics (always saved in photon diag stream) | Arrival time of the electrons for each bunch. The BAM measures in the common accelerator section from FL1 and FL2. Thus arrival times of FL1 and FL2 are saved in the same trace ... |
| ELECTRON_BUNCH_CHARGE | Electron Beam diagnostics (always saved in photon diag stream) | Bunch charge for each electron bunch along the accelerator |
| ELECTRON_BUNCH_COMPRESSION_MONITOR | Electron Beam diagnostics | Bunch compression monitors. They give a relative measure for the electron bunch duration |
| FLASH.BPM (Electron Beam Position Monitor) | Electron Beam diagnostics | Beam position of the electron bunch for different sections in the accelerator |
| TIMING_INFO_1 | General timing information (always saved in photon diag stream) | Train ID, set, bunch pattern, start time of FLASH2, reprate , ... |
FL2 Beamlines
| Name of the subsystem | function | description |
| PHOTON_DIAG_FL2_FAST_SHUTTERS | Beamline information ( always saved in the photon Diag DAQ as well) | Fast shutter status: ADC readout of the status of the FL2 shutter (0 is closed / 1 is open) |
| CAMERA_FL2.CAM01 | Beamline information / camera image | set of beamline cameras in the FL2 Hall |
| CAMERA_FL2.CAM02 | Beamline information / camera image | set of beamline cameras in the FL2 Hall |
Experiment related infrastructure (integrated at the beamline)
| Name of the subsystem | function | description |
| FLASH2.EXP.GHZ.ADC | Data from the Experiments | MTCA based 2/4 Gsample ADC available via patch panel at the beamline |
| FLASH2.EXP.MHZ.ADC | Data from the Experiments | MTCA based 108 Msample ADC available via patch panel at the beamline |
| EXPERIMENT_PROPERTY_SERVER_PARAMETER | Data from the Experiments | Parameters 19,20,21 and 60 of the FS-FL property server. This numbers can be set by an external program. |
| FLASH2.USER.DATA | Data from the Experiments | Parameters 0 to 7 FL24 property server. This numbers can be set by an external program. FLASH.UTIL/FL2.USR.STORE/FL24.EXP/VAL00-VAL07 (note these parameters are writable for not DESY accounts) |
Subsystems for User experiments
| Name of the subsystem | function | description |
| FLASH2.GOTTHARD | Data from user experiments | data from the (mobile) PSI Gotthard fast line detector detector |
| EXPERIMENT_KALYPSO | Data from user experiments | data from the (mobile) KALYPSO fast line detector detector |
| EXPERIMENT_MULTIP | Data from user experiments | some cameras associated to the MULTIP experiment |
| EXPERIMENT_MULTIP_CAM2 | Data from user experiments | some more cameras associated to the MULTIP experiment |
| EXPERIMENT_MUSIX | Data from user experiments | some cameras associated to the MUSiX experiment |
| EXPERIMENT_MUSIX_MOTORS | Data from user experiments | some motors associated to the MUSiX experiment |
| EXPERIMENT_URSAPQ | Data from user experiments | some float values which are filled by the URSAPQ experiment (note these parameters are writable for not DESY accounts) |
FL2 PPlaser
| Name of the subsystem | function | description |
| PP_LASER_FL2_DIAG_SLOW | Pump-Probe Laser Data | Delay settings, attonuator pos, and some synch info |
| FLASH_PP_LASER_LOCK | Pump-Probe Laser Data | Info about the quality of the synchronization of the laser |